Ultrasonic Disffuser with 3D Moon Lamp Design

How to adjust the lights of the ultrasonic diffuser?

• Firstly touch the metal head: To start the white light
• Secondly touch the metal head: The white light change to the orange
• Thirdly touch the metal head: The orange light change to the yellow.
• Fourthly touch the metal head: To turn the light off.

How to change the brightness of the ultarsonic diffuser?

The diffuser is no specific brightness levels to be adjusted. When you long press the metal head, the brightness of the lights will be brighter, releasing and then long press again, the brightness will be dim.

Timing Protection with 2 Mist modes

Due to the timing protection, you don’t need to worry about forgetting to turn it off when you’re sleeping at night.

• First time to touch the metal head: Beginning to continuous spray mode （Ten-hour timing protection starts counting down）
• Second time to touch the metal head: Switching to intermittent spray mode （Twenty-hour timing protection starts to counting down）
• Third time to touch: The humidifier function shut off and then the blue indicator light will be turned off.

Note: When you switch the spray mode, the timing protection will start countdown again. And the blue indicator light will be turned on if it is on spraying operation.

Delicate Warming Night Lamp

There have three colors LED lights can be activated while using it. Thus, you can choose a proper color of the light in different scenarios. Especially when you need to get up in the middle of the night to the bathroom.

Suitable For Air conditional & Heated Room

The Cool moon light ultrasonic diffuser can adjust the air humidity of indoor effectively, which has a great effect on moisturizing your skin. What’s more, it plays an important role for your body humidity circulation.

Ultrasonic Atomization Technology

Equipped with piezoelectric ceramic, the ultrasonic diffuser is able to provide exquisite mist which can diffuse the water fully into the air to (avoid dry atmosphere ) prevent dry air from irritating your throat.

Kindly Notice:

• Due to adoption of the ultrasonic atomization technology, it is recommended to use perfume so that it can prevent the Atomizing sheet from blocking. Please don’t put the oil into it directly, otherwise, it will be broken.
• When you use it for the first time or if you have not used the humidifier for a long time, it is necessary to remove the cotton swab from the humidifier, putting it into the water for 2 to 3 minutes before using it which is able to achieve a great effect on operating. (Please notice the spring on the bottom of the cotton tube while you re-install the cotton swab.)
• If there less than half of the water in the water tank, it is recommended to wait for 20 minutes before restarting the diffuser which is avoid the situation of the zero mist.
• In case the mist causes the ground to be wet, so it is better to place the diffuser at a height of 0.5 to 1 meter from the ground.
• Please keep the diffuser away from sources of heat and corrosion while it is working.
• Please don’t use fingers or stick to poke the atomizing sheet to avoid accidental damage.
• Please notice that the wooden base is not anti-slip, if the tank has water, don’t knock it down during the use in order to keep the water from leaking out.

Maintenance Tips :

• Please keep it dry and store it in a dry place if you don’t need to use it for some time.
• Please make sure the water tank has the water in it before turning the diffuser on.
• Please remember to connect the USB cord before using the humidifier function.
• Please clean it once a week, you can use a soft brush with diluted white vinegar to clean the atomizing sheet. Don’t rinse it with water directly.
• The water in the tank can’t be left for a week or longer otherwise you might smell the unpleasant odour. It is recommended to replace the water everyday to prevent the growth of the bacterial.